| Home | Product | Order | Contact Us |
Organic Pigments
Inorganic Pigments
Fluorescent Pigments
Pearlescent Pigments
Aluminum Oxide (Al2O3)
Silicon Oxide (SiO2)
Titanium Oxide (TiO2)
Zinc Oxide (ZnO)
Yttrium Oxide (Y2O3)
Zirconium Oxide (ZrO2)
Cerium Oxide (CeO2)
Large Surface Area Al2O3
Large Surface Area CeO2
Rare Earth-Zr Complex Oxide
Alumina Supported Rare Earth-Zr Complex Oxide
Rare Earth-Zr Complex Carrier Coating
Cerium Oxide (CeO2)
Aluminum Oxide (Al2O3)
Zirconium Oxide (ZrO2)
Chromium Oxide (Cr2O3)
Long Persistence Phosphors
UV Phosphors
IR Phosphors
Antibacterial Powder
Conductive Powder
Anti-Ultraviolet Powder
Far-Infrared Ceramic Powder
Ion Powder
Photocatalyst Powder
Others

 

Alumina-supported Rare Earth −Zr Complex Oxide

[Applied Field]

  • Catalyst for cleaning exhaust gases of automotives and motorcycles

  • Cleaning of industrial organic exhaust gases and indoor air

  • Catalyst for nature gases combustion

  • Catalytic decomposition in fluidized-bed in oil refining industry

[Product Properties]

  • Being carried by γ-Al2O3 can accelerate the dispersing of rare earth-Zr complex oxide in the carrier and keep the stability of the specific surface area at high temperature. Therefore, it improves the activity and lifetime of the catalyst materials

  • The crushing and mixing of γ-Al2O3 and rare-earth-Zr compound oxide can improve the mixture uniformity.

  • Slurring the products when using, it is convenient for the users.

[Technology Parameters]

Model

RC − 25A

RC − 35A

Composition

RC25,γ-Al2O3

RC35,γ-Al2O3

Physical Properties

Medium Diameter D50 (μm)

1.0 − 2.0

1.0 − 2.0

Bulk density (g/cm3)

1.0 − 1.5

1.0 − 1.5

Fresh Specific Surface Area (m2/g)

150 − 250

150 − 250

Aging Specific Surface Area (1000ºC 4hr m2/g)

40 − 60

50 − 70

Chemical Properties

CeO2(%)

60 ± 0.5

30 ± 0.5

ZrO2(%)

30 ± 0.5

60 ± 0.5

La2O3(%)

5 ± 0.5

5 ± 0.5

Y2O3(%)

5 ± 0.5

5 ± 0.5

S(%)

≤ 0.05

≤ 0.05

P(%)

≤ 0.03

≤ 0.03

Cl(%)

≤ 0.02

≤ 0.02

SiO2(%)

≤ 0.1

≤ 0.1

CaO(%)

≤ 0.05

≤ 0.05

Fe2O3(%)

≤ 0.05

≤ 0.05

[Instruction]

  • Making the product to 35% slurry with water, adding 1% poly-vinyl alcohol, then adjusting the slurry to PH=2~3 with nitric acid.

  • The second spreading, if needed, should be performed after the coatings prepared by the first spreading have been solidified and dried.

-------Asking for detailed materials and Samples-------

   

© 2007−2010 DBChemic, All Rights Reserved
Email: info@dbchemic.com
Tel:909-859-9052 Fax:775-551-9052
Address: 1926 W Holt Ave, Pomona, CA, 91768